MDF Mouldings

Contact us for a price
 

Our range of MDF moulding is available off the shelf in number of designs, manufactured from MR-MDF and primed white at 5.4m long.

It is recommended that MDF mouldings are allowed to remain in the fixing environment for approximately 24 hours before use. It is recommended not to fix MDF mouldings to damp plaster or any other damp materials. MDF Mouldings are easy to fix using traditional tools and materials. Before being fixed in place, any cut edges or other unsealed areas should be sealed by the fixer with at least one coat of proprietary wood primer complying with BS 5358 or one coat of polyurethane varnish.

We can also offer foil or veneered wrapped MDF Moulding available to order, please call 01903 282925 for more information.

Please Click the Profile to see a Picture of the MDF Skirting



Chanfer & Round

Pencil Round

Pencil Round
Window Board

Window Board
Ogee
Torus
Ogee


Torus

Fixing with nails

When using nails for fixing, they should be punched in below the surface and not inserted nearer than 12mm from any edge. For nailing through a moulded profile, lost head pins are recommended.

Fixing with adhesive

Most modern glues and panel adhesives work well, but manufacturers' recommendations should be followed in cases of porous damp surfaces.

Any visible nail or counter-sunk screw fixings should be filled using a good quality shrink resistant non-water based filler. Filled area should then be sanded smooth with a fine abrasive paper (grit range 350-500) prior to painting. Primed MDF Mouldings are ready to receive a top coat. Dark colours may require an additional undercoat, but a single top coat applied with a well-loaded brush will generally achieve a superior finish.


Related Products

Contact us for a price
Contact us for a price
Contact us for a price

Special Offers

For all our current special offers, please click here.

Compare