Marine Plywood

Marine plywood was developed for ship/boat building and has a very high performance under severe exposure conditions. It is also commonly used in construction applications where high performance is required or where the cost of replacement or consequences of failure warrant the additional cost.

The glue used in Marine Plywood is the same as used in exterior grade plywoods (WBP = Weather and Boil Proof )). Its the quality of the veneers and the durability of the species of timber used in the veneers that make Marine Plywood better than ordinary exterior grade plywood.

Far Eastern Marine Plywood

Manufactured in the Far East from moderately durable species to BS 1088·2003 ‘Plywood for Marine Craft’ standards. The primary difference between FE marine and FE exterior grade is the quality of the core. Marine plywood has far fewer and smaller core gaps. This is especially important where there is potential for the ingress of moisture, which can collect in the voids. It is a product which is commonly specified in applications where performance is a critical issue.

Gaboon Marine Plywood

High quality Gaboon veneers throughout keeps weight to a minimum whilst still providing the strength required and is manufactured in compliance with the British Marine Plywood Standard  BS1088-1:2003.  

This marine ply is recommended for nautical construction and boat furnishings. It has a wonderful lightness and an excellent resistance to damp conditions. It can also be used for interior furnishings thanks to its ability to take a painted or clear finish. It is suitable for boat structures, for example for the making of hulls, often with the use of fibre glass and epoxy resin.

Marine ply. The following are sheet sizes available from stock:

4mm	1220 x 2500
6mm	1220 x 2500
9mm	1220 x 2500
12mm	1220 x 2500
12mm	1220 X 2440 Far Eastern
18mm	1220 x 2500
18mm	1220 X 2440 Far Eastern
24mm	1220 x 2500
24mm	1220 X 2440 Far Eastern

 

Please contact us for further information.